FAMAG | What happened until now

The Wood drill of FAMAG series 1594 are counted among to the highest quality HSS drills in woodworking at all. The fully polished spirals have a special geometry and transport even wet wood chips ideal from deep-hole drilling out …

more...

15 August 2015

New Sets of Wood Drills –Series 1590

The CV wood drills of series 1590, we have now also available in three different new sets. The smallest set is located in the transparent sliding blister. The two major sets are packed in a high quality wooden box. By the way, these wooden boxes are manufactured exclusively for us in Germany and meet the highest quality…

more...

15 July 2015

Drill large holes in wood freehand

f holes are drilled with large diameter in solid wood, the best results are achieved in a stationary application. We at FAMAG mean by large diameters holes which are larger than 60mm. A classic tool for freehand application is the Forstner bit. If you look at the delivery programme of various manufacturers you will notice that the traditional length is 90mm and the largest diameter is 50mm. Why is that so?

more...

26 June 2015

Now new: FAMAG Isulation hole saw

In modern house construction and in renovation, there are now insulating materials like wood fibre insulation boards, polystyrene, mineral wool, polyurethane foam and much more. In practice, partly circular cut-outs for the distribution of electricity and sockets must be made in these materials. The problem for the craftsman is always the same: Today for this application there are not …..

more...