Admittedly was our first launch of PAROLI® hole saws a true belly-flop! Everything looked so easy and it was then not. 150 years of experience in the wood drill can obviously not easily transferred to a hole saw! As it was clear, that the quality of this hole saw does not match with the FAMAG-Standard quality, we immediately stopped selling. Although some customers were upset, but it was a quality decision.
FAMAG PAROLI®: but now we have it really!
Without us to pat on the back, we want to describe the quality of the new PAROLI® generation as EXZELLENT! And for a good reason:
- The main body of the new PAROLI® hole saw are made from a one tube! Standard practice is to shape a piece of metal approximately round and weld it to a base body together. Regarding the precision, that can never succed so well as from a pipe.
- Our result is a hole saw, whose base runs absolutly smoothly. And if the carbide teeth are well-positioned, the hole saw cuts perfectly round holes. This is today a succes at the new PAROLI® hole saws series!
- We provide the carbide teeth with a special cut and that generates that the new PAROLI® hole saw have a very clean hole entrance and also a very clean hole exit.
- The new PAROLI® Hole saw seated without play on the quick ejector shank. The result is a vey high dimensional stability of the holes. This was often the problem during the last system.
And exactly how it works:
- Mount the PARLOLI hole saw on the ejector shank so that the two ejecto pins are aligned with the holes in the hole saw.
- Push a little bit forward the ejector shank for locking and let's go:
- Saw materials such as solid wood, chipboard, plywood, MDF, plasterboard, wall tiles and even bricks, if these are not just "glas-hard".
- After the cut, slide the Ejector shank forward and remove in a breath the saw core.
- And joyfully on to the next hole!
About over 30 different kinds of Diameter are now available and in stock.
All diameters, sets and the completely accessories are on page 98 of our actual catalogue.
Fact is: All new improvements are without any additional costs. That means that all prices in catalogue 150 are still valid.
If a length of our PAROLI® 50 Series 2166 (usable length of 50 mm) is not long enough for your application, take our alternative hole saw PAROLI® 165 with an usable length of 165 mm. For sure, everything in stock, as you used to from FAMAG.
FAMAG PAROLI®: but now we have it really!
Ask your dealer or contact us, we will tell you which dealer will have these new sets with the special price in stock. You can reach us daily from 8:00am – 16:45 clock under +49 (2191) 9284-0.
Experiences, questions, suggestions or criticism? Bring it on! We are always glad to receive your message at info@famag.com.
