News from May 06, 2020

The new router bit sets of the Classic Line for all professional handymen are available!

You will find 12 router bits in a particularly nice quality which are packed in an attractive metal box. The quality of the used carbide plates is very good, but somewhat lower than that of the professional sets. This high quality carbide material is soldered very gently on the steel body. By this we reduce the unwanted hardening distortion and we minimize the grinding allowance, which in turn saves cost.

The shanks are machine wet cylindrical ground to the exact diameter of 8.0 mm and thus have a perfect concentricity. This is especially important for the router bits of the set 6+6, because here you find straight bits with particularly long shanks, e.g. for milling deep grooves. If the concentricity is not exactly right here, you will be in trouble!

We only use high quality bearings. As a result these router bits run particularly smoothly and have an exceptional service life. All cutters are labelled and show how deep they have to be clamped into the collet chuck of your router.

The packaging was particularly important for us. The FAMAG yellow metal lid of the beautiful box is very nicely embossed, which already let expect the good quality of the router bits.

Every router bit finds its safe place in a foam insert on which the dimension of the bit is clearly visible. You also find the matching pin wrench for the bearings in the set.

Two different sets are available. The 12-piece set with the classic assortment of straight bits, panelling bits and other bestsellers. The content is the same as in the professional set in the plastic box.

As second and completely new set we present the so-called 6+6 set. Here you will find 6 straight bits with extra long shank and 6 rounding over bits with bearing.

Take a look at the brochure