Bormax® 2.0 WS prima series 1624
Not every drilling can be done in a 90° angle, but you do not necessary need a special tool for it. Due to it’s 4 mm HSS-pre drill you can drill at many angles, even free hand! The Bormax® 2.0 geometry makes him proper for all softwoods, European hardwood as well as MDF panels.
Because of its good performance in European hardwood the Pilot guided-Bormax® 2.0 WS prima enjoys great popularity not only by the stairs builders. Because traditional drills for the stairs construction have a long triangular centre point, which does not identifies a keenly geometry. In hardwood, these tools often provide smoke signals...
On the contrary we have the HSS-Drill bit (diameter 4.0 mm and with a point angle of 60°) of our Pilot guided-Bormax® 2.0 WS prima. It pre-dills very slightly and gives the Bormax® an ideal guide, even in the head woodworking. This have already noticed many turners!
But attention, please do not use this tool in exotic hard woods or
worse, in the head woodworking of these exotic woods. Therefor we have
the TCT-Bormax³ which is perfect. And if you should simply need a good
Forstner Bit, no problem, just change the pre-drill with the brad point
and get it going.
Pilot guided Bormax® 2.0 WS prima at a glance
|
Description:
|
Pilot guided Bormax® 2.0 WS prima
|

|
Series:
|
1624 |
Included in delivery:
|
Pilot guided Bormax® 2.0 WS prima, Removable triangular brad point Ø 4 mm and Pre-Drill HSS-G Ø 4 mm, single packed
|
Dimensions:
|
Deliverable from Ø 15 mm to Ø 50 mm! Overall length 90 mm, Shank Ø 10 mm
NEW now available Ø 16,2 mm!
You need bigger diameters? Please take a look at our new Bormax 2.0 WS prima long series 1614! Deliverable up to Ø 120 mm!
|

|
Drilling at various angles?
|
The pilot-drill bit is ideal for drilling at an angle which is not 90° in workpiece surface. Series 1624 can be used with the centre point as traditional Bormax.
|
Prima?
|
Bormax® 2.0 „prima“ stands for our Bormax® 2.0 products of maximum flexibility, regarding to exchangeable centre/pre drill or pilot bit! Please take also a look at our Bormax® 2.0 WS prima long series 1614
|